Ultralift Cover Lifters
- Home
- Ultralift Cover Lifters
Previous slide
Next slide
Boomerang
The Boomerang is the second generation Visionlift. We have eliminated the need to drill a secondary bracket location and streamlined the design.
Using a dual shock system, it lifts the cover and places it behind the tub- providing the user with a clean visual line- allowing your client to see your backyard, socialize with guests and keep an eye on any children or pets while using their hot tub. The Visionlift provides a full 360-degree view.
- Made in North America
- Limited Lifetime Warranty
- Aluminum Brackets
- Galvanized Arms
- 110lb Dual Gas Shocks
- Positions Cover Fully Behind Hot Tub
- Max Cover Width: 98″
- Clearance Required: 20 ” from the back & 5″ on the Side
- Clearance Required for Raised back Spa Lip: 24-28″ & 5″on the side
- Cover rests on the ground- Visionlift Pads available
Previous slide
Next slide
THE FREEMOUNT
Composite cabinets are thin and laborious to reinforce. Lighting and sound features on a spa can also make finding a suitable cover lifter system difficult- often leaving the consumer no choice but to select a standard undermount system.
The FREEMOUNT changes that. Our system allows the consumer to purchase a lifter with hydraulic assist, allows them to select their preferred mounting height with Ultralift’s sliding bracket technology.
The FREEMOUNT changes that. Our system allows the consumer to purchase a lifter with hydraulic assist, allows them to select their preferred mounting height with Ultralift’s sliding bracket technology.
- No Drilling, No Holes
- Effortless Installation
- Works With All Cabinet Designs
- No Need to Reinforce the Spa Cabinet
- Made From Corrosion Resistant Aluminum
Previous slide
Next slide
Hydraulic Mount
The Hydraulic Mount hot tub cover lifter incorporates gas springs to assist with the opening and closing of your hot tub. The gas springs offset the weight of the cover, increasing your enjoyment and safety when using your hot tub or spa. It also makes it easier to place your cover securely and in the correct position when closing, which will reduce heat loss from your tub.
- Made in North America
- Limited Lifetime Warranty
- Aluminum Brackets
- Galvanized Arms
- Use on In-Ground Spas
- Extensions Available
- Max Cover Width: 109″
- Max Corner Radius: 16″
- Clearance Required: 12-14″ & 5″ on the Side
Previous slide
Next slide
Standard Mount
The Ultralift’s Standard Mount hot tub cover lifter lets you adjust the open cover height to your preference – high for greater privacy or low for a less obstructed view. You can mount the brackets high on the side of your spa so your cover enhances privacy, or low on the spa side or on the deck to store the cover behind your spa.
• Made in North America • Limited Lifetime Warranty • Aluminum Brackets • Galvanized Arms • Side or Deck Mount • Deck Mount on Round Spas • Extensions Available • Max Cover Width: 109″ • Clearance Required: 10-14″ & 5″ on the Side |
Previous slide
Next slide
UNDERMOUNT LIFTER
The Ultralift Undermount shares the same user-friendly cover lifter design, now featuring an Under Mount bracket that smoothly slides beneath your tub before filling. No drilling is required in the deck, patio, or spa skirt. With this system, one person can effortlessly lift the hot tub cover off and position it behind the spa, whether from inside or outside the tub.
- Made in North America
- Limited Lifetime Warranty
- Aluminum Brackets
- No Drilling into Your Cabinet
- Max Cover Width: 109″
- Clearance Required: 16″ rear & 5″ on the Side
The Visionlift
Utilizing a dual shock system, the Visionlift effortlessly raises the cover and positions it behind the tub. This creates a seamless visual line, offering users a clear view of their backyard. This design facilitates socializing with guests and ensures easy supervision of children or pets while enjoying the hot tub. With a full 360-degree view, the Visionlift stands as UltraLift’s most versatile lifter, enhancing your overall hot tub experience.
- Made in North America
- Limited Lifetime Warranty
- Aluminum Brackets
- Galvanized Arms
- 110lb Dual Gas Shocks
- Positions Cover Fully Behind Hot Tub
- Max Cover Width: 98″
- Clearance Required: 10-14″ & 5″ on the Side
GET A QUOTE
Contact us for current specials and sale pricing. Please provide your contact information and we will be sure you are informed of all specials and sales.