Ultralift Cover Lifters

Previous
Next

Boomerang

The Boomerang is the second generation Visionlift. We have eliminated the need to drill a secondary bracket location and streamlined the design. ​

Using a dual shock system, it lifts the cover and places it behind the tub- providing the user with a clean visual line- allowing your client to see your backyard, socialize with guests and keep an eye on any children or pets while using their hot tub. The Visionlift provides a full 360-degree view.

  • Made in North America
  • Limited Lifetime Warranty
  • Aluminum Brackets
  • Galvanized Arms
  • 110lb Dual Gas Shocks
  • Positions Cover Fully Behind Hot Tub
  • Max Cover Width: 98″
  • Clearance Required: 20 ” from the back & 5″ on the Side
  • Clearance Required for Raised back Spa Lip: 24-28″ & 5″on the side
  • Cover rests on the ground- Visionlift Pads available

Hydraulic Mount

The Hydraulic Mount hot tub cover lifter incorporates gas springs to assist with the opening and closing of your hot tub.  The gas springs offset the weight of the cover, increasing your enjoyment and safety when using your hot tub or spa. It also makes it easier to place your cover securely and in the correct position when closing, which will reduce heat loss from your tub.
 
• Made in North America 
• Limited Lifetime Warranty 
• Aluminum Brackets 
• Galvanized Arms  
• Use on In-Ground Spas  
• Extensions Available 
• Max Cover Width: 109″
• Max Corner Radius: 16″
• Clearance Required: 12-14″ & 5″ on the Side
Previous
Next

Standard Mount

The Ultralift’s Standard Mount hot tub cover lifter lets you adjust the open cover height to your preference – high for greater privacy or low for a less obstructed view. You can mount the brackets high on the side of your spa so your cover enhances privacy, or low on the spa side or on the deck to store the cover behind your spa.
 
​• Made in North America 
• Limited Lifetime Warranty 
• Aluminum Brackets 
• Galvanized Arms  ​
• Side or Deck Mount 
• Deck Mount on Round Spas 
• Extensions Available 
• Max Cover Width: 109″
• Clearance Required: 10-14″ & 5″ on the Side
Previous
Next
Composite cabinets are thin and laborious to reinforce. Lighting and sound features on a spa can also make finding a suitable cover lifter system difficult- often leaving the consumer no choice but to select a standard undermount system. 
​The FREEMOUNT changes that.  Our system allows the consumer to purchase a lifter with hydraulic assist, allows them to select their preferred mounting height with Ultralift’s sliding bracket technology.  
 
  • No Drilling, No Holes
  •  Effortless Installation 
  • Works With All Cabinet Designs    
  • No Need to Reinforce the Spa Cabinet 
  • Made From Corrosion Resistant Aluminum
 

GET A QUOTE

Contact us for current specials and sale pricing. Please provide your contact information and we will be sure you are informed of all specials and sales.

Your privacy is 100% guaranteed. Your information will not be shared. By submitting the form, I consent to receive electronic communications.